Designers to help a Diamond setter

Replies to This Discussion

Permalink Reply by Cosef Jewelturk on August 31, 2010 at 2:24am

Can i take your personal email for sending my rhinoceros samples pictures.Yusuf CAKICI (istanbul Turkey)

Permalink Reply by brad fairley on August 31, 2010 at 5:52pm

Hi Yusurf,
My email is bradfairley@optusnet.com.au, great to hear from you
regards from Aus
Brad

Attachments:

• JA Cartier Himalia earrings.doc, 34 KB

Permalink Reply by Sean McCarthy on August 31, 2010 at 3:02pm

I Work as a Platinumsmith/ Goldsmith. I specialize in diamond setting. I use Rhino and V-ray. I may be able to help you. Send me one of your designs. Post a reply to this and I'll get back to you.

Permalink Reply by brad fairley on August 31, 2010 at 5:57pm

Hi Sean,
My cousin has seen these he wants me to make them in 18ct white gold with princess cuts in the top hoop, I will also make the pendant (diamond only) for Christmas please give me an idea on price to draw in Rhino,
Thanks Brad

Attachments:

• JA Cartier Himalia earrings.doc, 34 KB

Permalink Reply by Sean McCarthy on August 31, 2010 at 6:06pm

Hi Brad.

Just looked at the design. I can model the earrings for you. Can you give me the dimensions of the earrings. The size of the stones and the diameter of the pearl. (not sure how the pearl will come out in the rendering!).
As for the price of the rhino images. Let me send you an image first. The rest may follow.

Permalink Reply by brad fairley on August 31, 2010 at 6:47pm

Hi Sean,
The top hoops will have 7x2.2mm princess cuts channel set in an arc and the bottom circle will have
10x 2.3mm diamonds in a circle with a 10.6mm paspaley round pearl, don`t worry about any rendering at this stage.
regs from Brad

Permalink Reply by Sean McCarthy on August 31, 2010 at 6:51pm

Hi Brad.
Do you want a working model that can be exported to STL or a Rhino model to work on.

Sean.

Permalink Reply by brad fairley on August 31, 2010 at 10:37pm

Rhino please Sean

Permalink Reply by Sean McCarthy on September 1, 2010 at 7:24am

Hi Brad.
What are you planning to set in the bottom link that the pearl is attached to. Also are you going to glue the pearl on or use a wedged post?

Sean.

Permalink Reply by brad fairley on September 2, 2010 at 5:16pm

Hows it going
Brad

Permalink Reply by Sean McCarthy on September 2, 2010 at 6:17pm

i'll start the modelling for you as a test run. But I need to know what you want to do about the link attached to the pearl!

Best regards.

Sean.

Permalink Reply by brad fairley on September 2, 2010 at 7:06pm

Sorry Mate,
Princess cuts all stones are 2.3 mm rounds and princess.
regs BF

• ‹ Previous
• 1
• 2
• Next ›
• Page